Gunstock Gallery Colors, Shapes, Engravings (2024)

Barracuda

The Barracuda is one of the original “skeletonized” stocks designed for the rimfire market. Today Boyds offers this shape in a variety of makes and models of rifles. The Barracuda is a lightweight design that utilizes a hand conforming thumbhole and grip to assist in the stability and control of the rifle. This is a right hand stock only. The completely free-float barrel improves accuracy and helps in heat dissipation from the barrel. This design is lightweight enough to carry on a hike, flashy enough to draw attention at the range, and comfortable enough to shoot all day.

• Weight is approximately 2.4 Lbs.
• Length of pull is 13 1/4"
• The overall length is 28"
• Leather-look rubber recoil pad for non-slip shouldering
• Laboratory acid based satin finish proven to resist chemical and harsh weather conditions
• 100% drop in fit - anyone can install

Charger

The Charger stock is a replacement for the popular 10/22® Charger Pistol. This stock has an ambidextrous grip that utilizes a slight palm swell for maximum grip and control. The slightly round contour of the forearm allows the firearm to be comfortably shot off-hand, from shooting bags, or with a bipod. The stock comes with a single swivel stud in the forearm to attach a sling or bipod.

Classic

The Classic is a compilation of the design elements we have found to be the most elegant and user friendly examples of the classic style. The slender, somewhat open grip is well defined, but does not extend too far below the toe line. The comb is parallel to the bore, which aids in scope use, and because of its straight-line design, minimizes cheek slap under recoil. Additional facial support is provided by a graceful cheekpiece that blends perfectly with the overall shape of the buttstock. The forend is flat/oval in cross-section, and is proportioned to complement barrels of 22-26 inches. It must be noted that due to the variations among models and tolerances that factories may or may not routinely adhere to, some minor fitting may be required even on our fully finished drop-in parts to achieve that perfect fit to your action.

Classic Fully Inlet

• Sleek beveled hand-conforming forend that is flat/oval in shape allowing superior palm to forend weld to help improve off hand shooting
• Classic design pistol grip for quick shoulder mount
• Graceful cheek piece runs parallel to the bore driving recoil to the shoulder, reducing cheek slap and discouraging the shooter from climbing up onto the scope
• Reinforcing screws installed for added strength
• Internal material of the forend has been removed to reduce weight
• 1/2" leather-look rubber recoil pad comes standard for non-slip shouldering
• Laboratory acid based satin finish proven to resist chemical and harsh weather conditions
• Finished and Unfinished parts come with swivel studs installed
• The length of pull on this stock is 13 3/4"
• The weight is approximately 2.8 lbs.

Classic Uninlet

Field Design

The Boyds Field Designed buttstocks and forends provide an economical means of breathing new life into proud, old guns. To uphold the nostalgia of these firearms, Boyds has recreated stocks inspired by the traditional appearance of these older firearms. The Field Design buttstocks and forearms are finished to replicate the appearance of the traditional oil rubbed finish.

NOTES:

• There may not be a forend for every buttstock offered
• Wood grain may vary from stock to forend

Featherweight Thumbhole

The FT's design is a synthesis of design elements requested by you, the customer, for a thumbhole design. With a large rollover cheek piece for scope usage and straight comb design to minimize cheek slap when shooting, the hand conforming thumbhole allows for increased accuracy while distributing the recoil among the palm and shoulder thus minimizing muzzle jump and felt recoil. The forend is proportioned to nicely complement barrels from 21 inches to 25 inches in length and will accommodate barreled actions with standard sporter contour barrels. Larger barrels up to a tapered varmint design can be inlet in these stocks. The forend also has side vents which permit the free floating barrel to cool efficiently for those long days at the range. The FT's are available in a wide range of inlettings to accommodate most barreled actions. It must be noted that due to the variations among models and tolerances that factories may or may not routinely adhere to, some minor fitting may be required, even on our fully finished drop in parts, to achieve that perfect fit to your action.

Featherweight Thumbhole Fully Inlet

• Internal material of the forend and butt have been removed to reduce weight
• 1/2" Leather-look rubber recoil pad for non-slip shouldering
• Reinforcing screws installed for added strength
• Tight tolerance of wood to metal fit to ensure accuracy
• Finished and Unfinished parts come with Swivel Studs Installed - 2 front, 1 rear
• Overall length is approximately 32"
• The weight is approximately 2.3 - 2.5 Lbs.
• Stocks are inlet for standard factory sporter contours. The barrel channel on these stocks can be opened up to Magnum factory contours as well as Factory Varmint Contours by you or a gunsmith, BUT the forends are not wide enough for bull barrel contours (straight contours of .875 or larger).

Featherweight Thumbhole Uninlet

• 1/2" Leather-look rubber recoil pad for non-slip shouldering
• Overall length is approximately 32"
• The length of pull on this item is 13 3/4"
• The weight is approximately 5lbs.
• Uninlet stocks are shaped only

Heritage

The Heritage follows the design of the Prairie Hunter. This design sports a Monte Carlo comb that is slightly raised to parallel the bore to aid with proper cheek alignment for scope usage. Nicely blended flutes in front of the comb conceal the thumb and prevent thumb to nose contact when the gun recoils. A graceful cheek piece provides additional facial support and is blended beautifully into the stock and grip which discourages the shooter from climbing up onto the scope and keeping the stock aligned with the shoulder for superior recoil absorption. A slender and slightly open oval pistol grip with slight palm swell is well defined with the comb to give you a firm grip, allowing quick mounting to the shoulder and aiding with proper eye position with the scope. The forend is where the Heritage deviates from the Prairie Hunter. The forend is round in cross-section to allow for the addition of a checkering pattern that wraps around the forend and aids in the grip of the shooters forward hand.

Heritage Features:

• Material under barrel channel has been removed to improve balance of the firearm
• 1/2" rubber recoil pad for quick non-slip mounting
• All Finished stocks come with 1 front and 1 rear blued swivel stud
• All Finished stocks are 100% machine inlet for a drop in fit
• Reinforcing screws installed for added strength at no additional cost
• Average weight of 2.8 lbs.
• Laboratory acid-based satin finish, proven to resist chemical damage and harsh treatment from the elements
• The length of pull on this stock is 13 3/4"
• The overall length is approximately 32"

Military

Sticklers for historical accuracy will appreciate our military replacement stocks in American Walnut; it's not only authentic down to the last detail, we apply a lustrous walnut stain and a natural oil finish to bring out the color and grain like you'll see in no other military stock.

Mini Pro Varmint

The first youth size gunstock offered by Boyds. Available for the Savage Rascal model only.

Mini Pro Varmint Features:

• Comes plastic buttplate.
• 11 1/4" Length of pull
• 1 - front and 1- rear swivel stud provided for rapid assembly and disassembly of bipod mount.
• Overall length 22 1/2"
• Approximate weight is 1.5 lbs.

Prairie Hunter

The Prairie Hunter design sports a Monte Carlo comb that is slightly raised to parallel the bore which aids with proper cheek alignment for scope usage and also has nicely blended flutes in front of the comb to conceal the thumb and prevent thumb to nose contact when the gun recoils. A graceful cheek piece provides additional facial support and is blended beautifully into the stock and grip which discourages the shooter from climbing up onto the scope and keeping the stock aligned with your shoulder for superior recoil absorption. A slender and slightly open oval pistol grip with slight palm swell is well defined with the comb to give you a firm grip which allows quick mounting to the shoulder and aids with proper eye position with the scope. A sleek beveled hand-conforming forend that is oval in shape allowing superior palm to forend weld to help improve off hand shooting, and is proportioned to complement barrels of 22 to 26 inches in length.

Prairie Hunter Features:

• Material under barrel channel has been removed to improve balance of the firearm
• 1/2" rubber recoil pad for quick non-slip mounting
• All Finished stocks are 100% machine inlet for a drop in fit
• Reinforcing screws installed for added strength at no additional cost
• Average weight of 2.8 lbs.
• Laboratory acid-based satin finish, proven to resist chemical damage and harsh treatment from the elements
• The length of pull on this stock is 13 3/4"
• The overall length is approximately 32"